Archived documentation version for the DevNet Expert exam. Learn more at DevNet Academy | Docs Home

917-front Audio Not Connected -

Unplug the cable, check for bent pins, and firmly plug it back in. 2. Check for "Sense" Pin Compatibility (Case Swaps)

The most frequent fix is simply ensuring the cable is plugged in. Power down the PC and unplug the power cord. Open the side panel. Locate the "F_AUDIO" or "Yellow" header on the motherboard.

Note: Some HP models do not allow you to disable this specific error check; in those cases, a physical jumper is required. 4. Clear the CMOS 917-front audio not connected

💡 If you are performing a "sleeper build" or moving an HP board to a new case, look for the "Front Audio Header Adapter for HP" online. It bridges the specific pins required to bypass the 917 error automatically. To help you get past this error quickly, tell me: The model of your PC (e.g., HP EliteDesk 800 G2). If you recently moved the motherboard to a new case. If you actually need to use those front audio jacks.

If you don't use the front audio ports and want the message gone: Restart the PC and tap to enter BIOS Setup. Navigate to Advanced > Device Options . Look for Front Panel Audio and set it to Disabled . Unplug the cable, check for bent pins, and

While it rarely prevents the computer from booting into Windows, it forces users to press F1 every time they start the machine, which is a significant inconvenience. Common Causes

A physical break in the front audio jack or the cable itself. Power down the PC and unplug the power cord

Sometimes the BIOS "hangs" on a hardware state that no longer exists. Locate the CMOS button (usually yellow) on the motherboard. Hold it for 5–10 seconds with the power off. Restart the system to see if the hardware is re-detected.

HP motherboards often use a proprietary pinout. Standard aftermarket cases use a generic HD Audio connector. If Pin 4 or Pin 10 (depending on the model) isn't grounded, the BIOS triggers the 917 error.

The error is triggered by a continuity check performed by the motherboard. If the circuit isn't completed, the BIOS assumes the hardware is missing or broken.