Body Sculpture Bc 5700 Magnetic Bike Manual 🔥 Instant

If your floor is uneven, adjust the end caps on the rear stabilizer to level the bike.

Scan, Time, Speed, Distance, Calories, and Odometer.

If you feel no change when turning the tension knob, the internal tension cable may have slipped. You will need to remove the plastic side shrouds to re-hook the cable to the magnetic brake assembly. Console Not Lighting Up Body Sculpture Bc 5700 Magnetic Bike Manual

Always wear athletic shoes; never operate the bike barefoot or in loose sandals.

Before diving into assembly, it helps to know what you’re working with: Hi-Tech Magnetic Resistance. Drive System: Quiet ribbon belt drive. If your floor is uneven, adjust the end

Hand pulse sensors on the handlebars. Adjustability: Vertical and horizontal seat adjustment. 2. Assembly Instructions: Step-by-Step

Slide the seat post into the main frame and secure it with the adjustment knob. Attach the seat to the horizontal slider, allowing you to move the saddle forward or backward for the perfect "reach" to the handlebars. Step 4: Handlebars and Console You will need to remove the plastic side

If the bike begins to squeak, check the bolts on the stabilizers and pedals first. Over time, these can loosen. Applying a small amount of silicone lubricant to the seat post can also eliminate friction noise. Resistance Issues

Thread counter-clockwise into the left crank arm.

Ensure the batteries (usually 2x AA) are fresh and that the wires inside the handlebar post are securely connected and not pinched. 5. Safety Tips