At high loads (above 500W or 10A), the onboard fan should be active. Ensure there is plenty of airflow around the heatsinks.
Press the SET button until the "V" indicator lights up. Use the ↑ and ↓ buttons to adjust the target voltage. bst900w manual
Press the SET button again until the "A" indicator lights up. Adjust the maximum output current using the arrows. At high loads (above 500W or 10A), the
Adjust your V and A, then long-press SET . Choose a location (e.g., M0) and press OK . bst900w manual
Ensure your input voltage is at least 2V lower than your target output.
At high loads (above 500W or 10A), the onboard fan should be active. Ensure there is plenty of airflow around the heatsinks.
Press the SET button until the "V" indicator lights up. Use the ↑ and ↓ buttons to adjust the target voltage.
Press the SET button again until the "A" indicator lights up. Adjust the maximum output current using the arrows.
Adjust your V and A, then long-press SET . Choose a location (e.g., M0) and press OK .
Ensure your input voltage is at least 2V lower than your target output.
