Turn the pumping station switch to "ON." The controller should display a continuous readout of the current channel status.
Seamlessly connects to your plant’s PLC for remote monitoring of lubrication cycles and system faults.
The is the brain of modern automated conveyor lubrication . Designed to deliver high-precision oiling while minimizing waste, this controller is essential for industries using monorails, enclosed tracks, or floor chains.
Allows you to control up to four different lubricators or zones with distinct settings.
You must define the "On" and "Off" times. Precision is measured in milliseconds, allowing for "shot-to-point" lubrication that hits specific chain pins without dripping.
If the "shot" isn't reaching the chain, adjust the regulator on top of the central pumping station to increase system pressure.
Utilize the "push-to-connect" terminal strips inside the unit for easy component installation. Ensure all proximity switches and solenoid valves are wired according to the specific schematic provided with your model. Programming Your Controller
The ASC is a multi-channel unit that provides several advantages over standard lubricators:
Once programmed, the system must be purged to remove air from the capillary tubes. Put the controller in an "on cycle" and ensure the proximity switch detects the chain. This forces the central pump to prime the lines. Common Troubleshooting and Maintenance