Drgem X Ray Service Manual Install -

Perform full automatic mA/kV calibration. If installing for the first time, you may see error E14 (CAL DATA EMPTY) until this is completed.

Connect the line power cable. Note that systems like the JADE Mobile X-ray support a free voltage input (100–240V). 4. System Configuration and Calibration

Always use personal monitoring and protective devices. drgem x ray service manual install

Connect the emergency switch and assemble the tube cover. 3. Electrical and System Integration

The GXR-C Series Quick Installation Guide outlines these key integration steps: Perform full automatic mA/kV calibration

Once powered on, the system must be calibrated through the service mode:

Enter service mode on the control console to run the SDK software and diagnostics. Note that systems like the JADE Mobile X-ray

Assemble the X-ray tube head and attach the collimator. Cable Connections: Connect the Up/Down switch and sensors.

The physical setup typically follows this sequence, as detailed in the GXR-SD Installation Guide : Raise the TS-FC2 or relevant tube stand.