Rp Charger Manual — Exide 2100

Charging with the Exide 2100 RP is designed to be straightforward, but following the correct sequence is vital. 1. Pre-Charge Check

Indicates a charging error. This could be due to a battery voltage that is too low (deeply discharged) or a blown fuse.

The charger typically starts automatically after a brief delay. The "Charging" LED will illuminate. If the charger does not start, check the DC fuse or the AC power supply. 4. Monitoring the Charge exide 2100 rp charger manual

Always wear safety glasses and gloves.

If you require the specific wiring diagrams or part numbers for your unit, it is recommended to have your model and serial number ready. These are typically found on the data plate located on the side or rear of the charger cabinet. Charging with the Exide 2100 RP is designed

Current tapers off as the battery reaches full voltage.

The charger delivers high current to reach ~80% capacity. This could be due to a battery voltage

Apply a light coat of dielectric grease to the connectors to prevent oxidation. Technical Support and Manuals