Clean the housing using a dry, soft cloth. Do not apply abrasive cleaners or chemical solvents. ❓ Troubleshooting & Factory Reset Potential Cause Resolution No pressure output Supply voltage too low or Check the 24 V DC supply and the primary compressor line. Output deviates from setpoint Input pressure is less than the required bar margin
Selectable presets available (Fast, Universal, Precise) festo r-r-fto-kc-2018 manual pdf
IP65 when correctly installed with its original plug socket ⚙️ Installation and Integration Steps 1. Mechanical Mounting Clean the housing using a dry, soft cloth
Ensure that the input pressure stays at least 1 bar above the target pressure. Incorrect parameter profile selected Output deviates from setpoint Input pressure is less
Connect the compressed air supply. The air must be clean and filtered.
Press and hold the [Edit] key for 3 seconds.
): Must always be at least 1 bar greater than the maximum regulated outlet pressure 0–10 V DC or 4–20 mA