Manual: Galaxy Aqua Premier Installation

Installation must be performed by a qualified person and comply with current IEE Wiring Regulations and local Water Authority bylaws.

Hook the unit over the top screw, align it using a spirit level, then mark and drill the remaining bottom fixing holes. 2. Plumbing Connections Galaxy Aqua Premier Water Heater 9.5Kw - 45793266

Designed for direct mains cold water supply only. Pressure Requirements: galaxy aqua premier installation manual

The is a high-performance, instantaneous electric water heater designed for efficient unvented installation. This manual guide provides the essential steps and technical requirements to ensure a safe and professional setup. Technical Specifications Overview

Typically 9.5kW (also available in other variants). Installation must be performed by a qualified person

Do not install the unit where it may be exposed to freezing conditions (e.g., outdoors).

Ensure the electricity supply is isolated at the consumer unit before removing the shower cover. Step-by-Step Installation Guide 1. Positioning and Fixing Plumbing Connections Galaxy Aqua Premier Water Heater 9

Minimum Running Pressure: 1.0 Bar (15 psi) at 8–9 litres/minute. Maximum Static Pressure: 10 Bar (150 psi).

Use the backplate as a template or mark the three fixing positions. The top hole is usually a "key-hole" slot; drill this first and tighten the screw so it protrudes about 10mm.