You can enter random numbers before or after your actual PIN to prevent onlookers from seeing your real code. 4. Safety and Security Functions
Before using the lock, you must register your . Most Gateman units ship with a default code (often 1234 ), but for security, you should change this immediately. To Register/Change the PIN: Open the battery cover on the interior unit. Press the [I] (Registration) button briefly.
Ensure the door is fully closed and the strike plate is aligned with the bolt. gateman v20 manual
Touch each one by one to the card reader on the exterior unit. (You will hear a beep for each successful scan). Press the [I] button to finish.
There is a toggle switch inside the battery compartment. Auto: The door locks automatically seconds after closing. You can enter random numbers before or after
To prevent strangers from guessing your code via fingerprint smudges, the V20 requires you to touch the keypad with your palm before or after entering your PIN.
Enter your PIN or tap a registered card to silence the alarm. Most Gateman units ship with a default code
When you are inside, slide the "Double Lock" switch to the red position. This prevents the door from being opened from the outside, even with a valid PIN or card.
If the lock is tampered with or forced from the outside, an 80dB alarm will sound. 5. Battery Replacement & Emergency Power The Gateman V20 uses 4 AA Alkaline batteries .
Note: Registering a new card will typically delete all previously registered cards, so scan them all in one session.