Set the base to "Survey-in" mode to establish its position, or enter fixed coordinates. 4. Saving Configuration Permanently
Ensure the antenna has a clear, unobstructed view of the sky.
USB cable (USB serial port converter may be needed). Drivers: Install the Gnss sensor driver . 2. Connecting and Verifying the Receiver gpsuinet setup
To give you the most relevant guidance, could you let me know: Are you setting up a or a Rover ?
Once connected, you must configure the receiver to function as a Base or Rover. A. Setting Up as a Rover (10Hz Example) Go to Tools -> Receiver Configuration . Set the base to "Survey-in" mode to establish
This guide outlines the complete setup process, from connecting the device to finalizing configuration for optimal performance. 1. Prerequisites for GPSUINET Setup
What is the specific (e.g., u-blox F9P)? Are you trying to connect to a 3rd-party RTK network ? Configure GPS with U-Center USB cable (USB serial port converter may be needed)
Select devices: , "Flash" , and "EEPROM" . Click "Send" to permanently save the changes. 5. Troubleshooting GPSUINET Setup