This motherboard uses DDR3 memory, which was a transitionary feature for the G41 chipset.
If you need to reset the BIOS settings or clear a forgotten password, locate the jumper labeled CLR_CMOS or JBAT1. Turn off the PC and unplug the power cable. h-ig41-uatx rev 1.1 manual
Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear). Wait 15 seconds. Return the jumper to pins 1-2. Plug in and restart. Rear I/O Port Layout The back panel of the H-IG41-uATX typically includes: This motherboard uses DDR3 memory, which was a
Note: This board is often picky with "high-density" RAM. For best results, use "low-density" modules (chips on both sides of the stick). Internal Headers and Connectors Move the jumper cap from pins 1-2 (Normal)
The H-IG41-uATX (Revision 1.1) is a legacy motherboard commonly found in HP and Compaq Pavillion desktop systems, such as the Slimline series. Manufactured by Foxconn (often referred to by its codename, Eton), this board utilizes the Intel G41 Express chipset. Since official digital manuals for these OEM boards are often difficult to locate, this guide serves as a comprehensive technical reference for installation, jumper settings, and hardware compatibility. Technical Specifications
Intel Core 2 Quad (up to Q9xxx series)Intel Core 2 Duo (up to E8xxx series)Intel Pentium Dual-CoreIntel Celeron 400 series Memory Configuration