Hilger Watts Theodolite Manual Repack __full__ -

Ensure the optical plummet eyepiece is tucked in or protected according to the case’s internal mold. Securing the Instrument

If you are shipping the instrument via a carrier like UPS or FedEx, the original metal case is not enough protection. You must "double-box" the unit. Surround the metal case with at least three inches of high-density foam or bubble wrap inside a heavy-duty corrugated cardboard box. Avoid using packing peanuts, as they can compress or shift, leaving the heavy instrument vulnerable to the "settling" effect during transit. Environmental Protection hilger watts theodolite manual repack

Center the leveling foot screws so that the instrument sits at a mid-range height. Ensure the optical plummet eyepiece is tucked in

Once the theodolite is placed on the base plate of the case, engage the locking clips. If your model uses a threaded center screw to hold the base, ensure it is snug but not overtightened. The goal is to prevent lateral shifting while allowing the rubber mounts to absorb vertical vibrations. Surround the metal case with at least three

Rotate the alidade (the upper part of the instrument) until it aligns with the internal guides of the case. On many Hilger & Watts models, there is a small scribed line or arrow on the base and the standards that indicates the packing alignment.

Align the telescope horizontally so it is level with the horizon.

Before placing the instrument in its container, perform a basic cleaning. Use a soft blower brush to remove dust from the glass circles and the objective lens. Wipe the metal surfaces with a lint-free cloth lightly dampened with a drop of high-grade instrument oil to prevent corrosion. Ensure that all motion clamps are slightly loosened; a locked clamp during transport can lead to stripped gears or bent spindles if the case sustains an impact. Setting the Neutral Position