Hitarget V30 Plus Manual |verified| May 2026

Using the Hi-Survey Road software on your controller, set the data link to "Internal UHF." Choose a frequency (channel) that is clear of interference.

Place the receiver on a tripod over a known point. Attach the UHF antenna.

One of the standout features is the dual-battery slot. The system supports "hot-swapping," meaning you can replace one battery while the unit is running without losing your fix. hitarget v30 plus manual

Always start by creating a new project and selecting the correct Coordinate System . If you are working in a local grid, you will need to perform a Site Calibration (Control Point Alignment).

While the V30 Plus is IP67 rated (waterproof), always wipe down the pins and battery contacts if the unit has been used in heavy rain. Using the Hi-Survey Road software on your controller,

Select the appropriate (e.g., VRS or Nearest) to receive corrections. 3. Using Hi-Survey Road Software

The V30 Plus features a simplified interface with status lights for Satellites, Bluetooth, Data Link (UHF/Network), and Power. One of the standout features is the dual-battery slot

In the software, input your NTRIP caster details:

Check for overhead obstructions (trees/buildings) or verify that your data link settings (frequency/NTRIP) are correct.