Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 May 2026

Insert the USB drive containing your driver files.

Press for Intelligent Provisioning or use the SSA (Smart Storage Administrator) during boot to create your RAID 1 or RAID 5 volume. 3. Inject the Driver During Windows Setup Start the Windows Server 2022 installation. Insert the USB drive containing your driver files

Before the driver matters, the controller must be in the correct mode. Reboot and press to enter System Utilities . Inject the Driver During Windows Setup Start the

The S100i is a "software RAID" (SW RAID) solution integrated into the motherboard of many HPE ProLiant Gen10 servers. Unlike high-end "P-class" hardware controllers that have their own dedicated processor and cache, the S100i uses your server's CPU to manage RAID levels like 0, 1, 5, and 10. The S100i is a "software RAID" (SW RAID)

Navigate to > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options .

HPE provides official, signed drivers specifically for Windows Server 2022. You can download the latest version directly from the HPE Support Center . Look for version 1010.14.0.0(C) or newer.

Setting up a server often hits a roadblock when the installer can't find your hard drives. If you're using an HPE Gen10 server with an embedded controller, you likely need the to bridge that gap. What is the HPE Smart Array S100i SR Gen10?