Hyt Tc-320 Programming Software Updated File

Here you can enter the RX (Receive) and TX (Transmit) frequencies.

Enter your CTCSS or DCS tones here to keep your conversations private.

You need the HYT HT320 CPS . It is a Windows-based application. Note that newer versions are generally backward compatible with older radio firmware. hyt tc-320 programming software

If the software won't open, try right-clicking the program and selecting "Run as Administrator" or using Compatibility Mode for Windows 7. Conclusion

Connect the programming cable to a USB port on your computer. Plug the Mini-USB end into the side of the TC-320. and set the volume to about 50%. 2. Identify the COM Port Here you can enter the RX (Receive) and

Match the radio to your FCC-licensed frequencies or existing walkie-talkies.

Eliminate "chatter" from other nearby businesses on the same frequency. It is a Windows-based application

A progress bar will appear. Do not unplug the cable or turn off the radio during this process, as it could "brick" the device. Once finished, the radio will usually restart or beep. Common Troubleshooting

Before you start, ensure you have these three essential components: