Jby-6201 Manual -

The machine uses UV (Ultraviolet) and MG (Magnetic) sensors. If a suspicious bill is detected, the machine will stop and display an error code (often "y" or "ALARM"). The suspicious bill will always be the last one in the stacker. Maintenance Tips

If your JBY-6201 is a money-counting machine, it is designed for high-volume commercial use with built-in counterfeit detection features.

Use the "BAT" button to set a specific count (e.g., 50 or 100). The machine will stop automatically once it reaches that number. jby-6201 manual

Before mounting, verify the wiring harness. Most units include a Power/Ground harness, RCA outputs for speakers, a GPS antenna port, and USB inputs.

Access the Bluetooth app on the home screen. Ensure your phone’s BT is discoverable. If prompted for a PIN, the default is usually 0000 or 1234 . The machine uses UV (Ultraviolet) and MG (Magnetic) sensors

Connect the camera's video lead to the "CAM-IN" RCA port. The red trigger wire must be tapped into the car’s reverse light power wire to activate the screen automatically when shifting to reverse.

Locate the "KEY1" and "KEY2" wires. These are used to map your car’s physical steering buttons via the "Wheel" app in the Android settings. Core Functions Maintenance Tips If your JBY-6201 is a money-counting

The JBY-6201 is a popular "no-name" generic Android head unit (often found on platforms like AliExpress) that typically runs on and uses an STM32 MCU . Wiring and Installation

Most units come with Google Maps pre-installed. For offline use, you can download maps over Wi-Fi or install third-party apps like HERE WeGo or Sygic .

If the unit freezes, look for a small pinhole labeled "RST" on the front panel. Use a paperclip to press it for 5 seconds to perform a hard reboot. 2. JBY-6201 Banknote Counter