Jby6201 Manual [patched] -

If storing for more than 48 hours, run a "Pump Armor" or light oil through the system to prevent the internal valves from rusting or sticking. 6. Troubleshooting Common Issues

The JBY6201 must be "primed" to remove air and factory-tested fluids before it can spray paint.

Turn the pressure control knob counter-clockwise to the lowest setting. jby6201 manual

Check for a clogged inlet strainer or a stuck intake ball valve. Tap the intake valve lightly with a wrench to loosen dried paint.

The spray tip may be worn or the gun needle needs adjustment. Ensure the tip is fully seated in the guard. If storing for more than 48 hours, run

Let me know which specific component you're looking to repair!

Always engage the trigger safety lock when not actively spraying. Turn the pressure control knob counter-clockwise to the

Ensure you are plugged into a grounded outlet to prevent static sparks. 5. Cleaning and Long-Term Storage

Turn the Prime/Spray valve to the PRIME position (usually pointing down or toward the return tube).

Turn the Prime/Spray valve to the SPRAY position.