Licensecert.fmcert Official

Click the "Sync" button in the License tab to force a check against Claris servers. File Missing During Linux Installation

Did you receive a when trying to upload the file?

This file is a digitally signed certificate provided by Claris. It contains encoded information regarding your specific license agreement, including:

How to Install Windows® 10 To A GUID Partition Table (GPT)

Properly Install Windows® 10 on Your Storage Disk With UEFI Enabled In The System BIOS And The GPT (GUID Partition Table) Created

Summary

We recommend performing Windows® 10 installations enabling UEFI with a GUID Partition Table (GPT).
Some features may not be available if you use the Master Boot Record (MBR) style partition table.

Configure a system to install an OS to a GUID Partition Table (GPT) partition licensecert.fmcert

Note
  • We highly recommended performing a backup of your data. If you have a second disk drive with enough available capacity, you can create a system image and recover the full installation as it was before you started this procedure.
  • Screenshots and directions below are examples. Consult with your motherboard or system manufacturer for specific BIOS instructions.
  1. Connect a USB Windows® 10 UEFI install key
  2. Boot the system into the BIOS (for example, using "F2" or the "Delete" key)
  3. Locate the "Boot Options Menu"
  4. Set Launch CSM to "Enabled." If CSM is set to "Disabled," you can skip to step 8 below
  5. Set Boot Device Control to "UEFI Only"
  6. Set Boot from Storage Devices to UEFI driver first
    Set Boot from Storage Devices
  7. Save your changes and restart the system.
  8. Reenter the BIOS (for example, using "F2" or the "Delete" key).
  9. Confirm in the Boot Priority List that the "USB UEFI OS Boot" option is at the top of the list.
    Boot Priority
  10. Reboot the system and install Windows* as usual.

Confirm that Windows* is installed to a GPT partition.

  1. Boot into Windows*
  2. Open Disk Manager (For Windows® 10, press the "Windows*" key and the "X" key simultaneously, then click "Disk Manager"). You see three partitions including the EFI System Partition.

Three partitions, including the EFI System Partition

3. Right-click the disk shown as (Disk x, Basic, Capacity, Online) on the left
4. Select "Properties"
5. Click the "Volumes" tab. Here you can confirm the "Partition style".
Partition style

Questions? Check out our Community Forum for help. Click the "Sync" button in the License tab

Issues? Contact Solidigm™ Customer Support:
[Chinese] [English] [German] [Japanese] [Korean]

How informative was this article?

    Form submission failed!

    Success

    Click the "Sync" button in the License tab to force a check against Claris servers. File Missing During Linux Installation

    Did you receive a when trying to upload the file?

    This file is a digitally signed certificate provided by Claris. It contains encoded information regarding your specific license agreement, including: