Liz Ocean Wsg 32 Install ((better)) [BEST]

Inspect every joint. If a leak is found, shut off the water immediately and tighten the fitting. Power Up: Plug the WSG 32 into a dedicated GFI outlet.

Slowly turn the water back on. Open the bypass inlet valve only partially to allow the resin tank to fill slowly, preventing air pockets. liz ocean wsg 32 install

Turn off the main water supply to the house. Inspect every joint

Enter your local water hardness levels (measured in GPG) and the current time into the digital controller. The WSG 32 uses demand-initiated regeneration, so accurate hardness data is vital for salt efficiency. Maintenance Tips Slowly turn the water back on

The WSG 32 must be integrated into your main water line. Safety is the priority during this phase.

Identify the "In" and "Out" ports on the WSG 32 control valve. Reversing these will prevent the system from functioning.