Mikrotik L2tp Server Setup Full |verified| < 2027 >

Add individual credentials for each person or device connecting to the server. Go to and click + . Name: The client’s username. Password: The client’s unique password. Service: Select l2tp . Profile: Select l2tp-profile . Step 5: Configure Firewall Rules

Setting up a provides a secure, encrypted tunnel for remote access, typically fortified with IPsec for industrial-grade data protection. This guide provides a full, step-by-step walkthrough to configure your MikroTik router as a VPN hub. Prerequisites A public IP address on your MikroTik WAN interface. Firewall access to UDP ports 500, 1701, and 4500 . Step 1: Create an IP Pool mikrotik l2tp server setup full

Enter a strong pre-shared key (PSK) that clients will use to connect. Step 4: Create VPN Users (Secrets) Add individual credentials for each person or device

The profile defines the bridge between the VPN tunnel and your local network. Go to and click + . Name: l2tp-profile . Local Address: Your router’s LAN IP (e.g., 192.168.88.1 ). Remote Address: Select the vpn-pool created in Step 1. DNS Server: Add your preferred DNS (e.g., 8.8.8.8 ). Step 3: Enable the L2TP Server with IPsec Password: The client’s unique password

Set the range (e.g., 192.168.88.10-192.168.88.20 ). Step 2: Configure the PPP Profile

This step activates the server and secures it with a pre-shared key (PSK). Go to and click L2TP Server . Check Enabled . Default Profile: Select l2tp-profile . Use IPsec: Set to required or yes .

Ensure the router accepts incoming VPN traffic. Add these rules to the top of your list: UDP 500, 4500: For IPsec negotiation. UDP 1701: For the L2TP tunnel. IPsec-ESP: To allow encrypted data packets. Best Practices for 2026