Mt6755 Scatter File ((hot)) Page

You can use a scatter file to "Readback" (dump) the current ROM from your phone to your PC.

Click "Download," power off your phone, and connect it to the PC while holding the Volume Down or Volume Up button (depending on the model). Common Issues and Errors

Click on the "Choose" button next to the Scatter-loading File field. Navigate to your folder and select MT6755_Android_scatter.txt . mt6755 scatter file

The MT6755 scatter file is the bridge between your computer and your phone’s hardware. Always double-check that the scatter file matches your specific device variant; using a file meant for a different P10 device can result in a permanent hard brick.

If your device is stuck in a boot loop or won't turn on (hard brick), you need the scatter file to tell the SP Flash Tool where to write the factory firmware. You can use a scatter file to "Readback"

Ensure you have the MediaTek VCOM drivers installed on your PC.

This usually means the file is corrupted or you are using an outdated version of SP Flash Tool. For the MT6755, use SP Flash Tool v5.x or newer. Navigate to your folder and select MT6755_Android_scatter

At its core, a scatter file is a configuration file (usually in .txt format) used by MediaTek’s flashing utilities. It describes the structure of the NAND or eMMC flash memory on the MT6755 chipset.

This error occurs if the partition table on the phone doesn't match the scatter file. This happens if you try to flash firmware from a different model. BROM Error: Usually a driver issue or a bad USB cable. Final Thoughts

Open the application ( flash_tool.exe ).