While holding the button, plug the USB cable into the PC and the box. Use the USB port closest to the SD card slot on the box.
Your PC will not see the box normally.You must force it into "Loader" or "Maskrom" mode. Unplug the power cable from the MXQ box. Insert a toothpick into the (headphone jack). Press and hold the hidden button inside the AV port. Mxq Rk3229 Emcp V3.1 Firmware
To make the PC recognize the box.
Flashing firmware carries risks.Incorrect files can brick your device.Proceed at your own risk.Always back up your important data first. Understanding Your Hardware While holding the button, plug the USB cable
Try using a different version of FactoryTool or Android Tool. Unplug the power cable from the MXQ box
The software to push the firmware. The Firmware File: A .img file specifically for your board. Step-by-Step Installation Guide Follow these steps carefully to flash your device. Step 1: Install the Drivers Download the Rockchip Driver Assistant. Extract the zip file on your PC. Run the DriverInstall.exe file. Click "Install Driver" and wait for success. Step 2: Prepare the Flashing Tool Download and extract FactoryTool (preferred for beginners). Open the application ( FactoryTool.exe ). Click on the "Firmware" button at the top. Browse and select your downloaded .img firmware file. Wait for the tool to load the firmware. Step 3: Connect the MXQ Box in Recovery Mode
United Reggae is a free and independant magazine promoting reggae music and message since 2007. Support us!