According to the , Nitocote PE135 is a non-hazardous, water-based liquid. However, standard safety practices are essential:

The formula is solvent-free, non-toxic, and free from hazardous materials like coal tar pitch or asbestos. Technical Specifications Density (@ 27°C) 1.28 ± 0.03 g/cc Solids Content (Volume) ASTM D2697 Adhesion Strength >1.0 N/mm² ASTM D4541 Water Absorption BS 1881 Pt. 122 Water Permeability DIN 1048 Pt. 5 Surface Dry Time 10–15 min (@ 35°C) ASTM D1640 Nitocote PE135 MSDS & Safety Guidelines

It provides excellent resistance to chloride and sulfate ions, as well as a variety of chemicals like 20% lactic and acetic acids. Its UV stability ensures it won't deteriorate under strong sunlight.

Store in original, tightly closed containers in a cool, dry place (below 40°C). Application Best Practices

If contact occurs, wash with soap and water immediately. Avoid using solvents for skin cleaning.

Fosroc is widely recognized as one of the best protective and waterproofing coatings for concrete and masonry . This single-component, eco-friendly coating is based on a hydrophobic polyester resin, offering a unique combination of curing and protection in a single application. Key Features and Performance

Unlike many traditional coatings, Nitocote PE135 can be applied to damp concrete just 24 hours old.

For the , surfaces must be clean and free of dust, oil, or grease. Porous substrates should be pre-soaked with water for 30 minutes before application.