Phison Mpall V5.13.0c -

Before you begin, you must verify that your USB drive actually uses a Phison controller. MPALL V5.13.0C is specifically built for the following series: PS2251-67 PS2251-68 PS2251-03 PS2251-09 (Some revisions)

Download the Phison MPALL V5.13.0C package. Ensure you also have the correct and Firmware File (.bin) specifically for your controller version. 2. Configure the Tool Run MPALL_F1_9000_v513_0C.exe as Administrator.

Disclaimer: This process involves low-level firmware flashing. If done incorrectly, it can permanently brick your USB drive. Proceed at your own risk. 1. Preparation Phison Mpall V5.13.0c

If MPALL fails to clear the protection, you may need to enter by shorting two pins on the controller chip—though this is an advanced hardware move. Conclusion

Click in the MPALL main window. Your drive should appear in one of the boxes. Press Start . Before you begin, you must verify that your

In the tab, select your specific IC (e.g., PS2251-07).

Use a tool like ChipGenius or Flash Drive Information Extractor to identify your "Controller Part-Number." If it doesn't start with "PS," this tool will not work. Step-by-Step: Using Phison MPALL V5.13.0C If done incorrectly, it can permanently brick your USB drive

In this guide, we will dive deep into what Phison MPALL V5.13.0C is, which controllers it supports, and how to use it safely to restore your hardware. What is Phison MPALL V5.13.0C?

If you’ve ever encountered a USB drive that shows as "Read Only," "Write Protected," or simply refuses to format, you’ve likely stumbled upon the name . This specific version of Phison’s Mass Production Tool (MPTool) is widely considered the "Swiss Army Knife" for reviving bricked flash drives utilizing Phison controllers.

The tool cannot communicate with the NAND memory. This often happens if you are using a USB 3.0 port for a tool that requires a USB 2.0 connection, or if the controller is physically damaged. "Write Protect" Still Exists