Switchable between Imperial (Feet/Inches) and Metric (Meters). 2. Getting Started: Basic Operation Battery Installation Open the battery compartment on the back of the device. Snap in a fresh 9V alkaline battery .
Ensure there are no obstructions (furniture, plants) between you and the target.
Press the button. The distance will appear on the LCD screen. Calculating Area (Sq. Ft / m²) Press the AREA button. Measure the Length of the room (Press READ). Measure the Width of the room (Press READ). Point-N-Measure Digital Tape W5746 User Manual
This is a sign of a low battery. Replace the 9V battery immediately for the most accurate results. Safety Warning
Use the C or CE button to wipe the current reading or clear the memory cache. 5. Troubleshooting & Maintenance Snap in a fresh 9V alkaline battery
Close the compartment. If the LCD screen doesn't turn on, ensure the polarity (+/-) is correct. Powering On/Off Press the READ or ON button once.
By following this manual, your will become an indispensable tool in your kit, saving you time and ensuring your projects are measured to perfection. The distance will appear on the LCD screen
This usually means the device is too close to a surface (under 2 feet) or the signal is being absorbed by a soft surface (like curtains). Try measuring against a solid, flat wall.