Rok Power Washer Instructions May 2026

Screw the lance or wand onto the trigger gun.

Connect a standard garden hose to the water inlet. Ensure the water source is fully turned on before starting the motor to avoid damaging the pump seals.

For petrol models, check the engine oil level with the dipstick and ensure the fuel tank is filled with fresh, unleaded petrol. rok power washer instructions

Before turning the power on, squeeze the spray gun trigger until a steady stream of water flows out. This "primes" the system by removing trapped air.

Using a ROK power washer effectively requires following specific setup and safety procedures to prevent machine damage and ensure personal safety. Whether you are using a petrol-powered or electric model, the basic operating principles remain consistent: establish a steady water flow first, purge the air, and never run the pump dry. Screw the lance or wand onto the trigger gun

Always wear safety goggles, ear protection (especially for petrol models), and sturdy, closed-toe footwear. 2. Step-by-Step Assembly & Setup

Securely connect the high-pressure hose to the pump's outlet and the other end to the spray gun. For petrol models, check the engine oil level

Before starting your ROK power washer, inspect the unit for any visible damage.

Choose the appropriate nozzle for your task and snap it into the quick-connect coupler on the wand. How to setup and start a pressure washer