Tgc Bc-90-1h Manual //top\\ -

The BC-90-1H interface is designed for simplicity and safety, featuring several key buttons and indicators:

If the priority light is not on, press the [Priority] button. You cannot change settings unless the priority light on your specific remote is lit.

If an error occurs, the temperature screen will show a specific fault code (e.g., "11" for ignition failure) to help with troubleshooting. Operation Guide tgc bc-90-1h manual

A red light illuminates when the temperature is set to 50°C or higher as a warning to prevent scalding.

Use the arrow buttons to reach your desired heat. For safety, the system typically won't allow temperature changes while water is actually flowing at high temperatures. The BC-90-1H interface is designed for simplicity and

Always check the water temperature with your hand before stepping into the shower.

Displays the status of the heater. It often turns from green (standby) to orange or yellow when the burner is active. Operation Guide A red light illuminates when the

Used to activate or shut down the water heater.