: Powers the heater on or off. Note that only the controller with "Priority" can shut down the unit while it is in use.
: Requires professional inspection. Contact Towngas Customer Service at 2232 1111 .
: If you have multiple remotes, press the Priority button until the indicator lights up. You cannot switch priority while water is currently running. Set Temperature : Use the and buttons. The adjustable range is typically 35∘C35 raised to the composed with power cap C to 60∘C60 raised to the composed with power cap C . tgc bc901h manual
: Simply turn on a hot water tap. The burner ignites automatically, and the operation light will turn yellow.
: Ensure the gas valve is fully open and the gas supply is not interrupted. Try turning the tap off and on again after 10 seconds to reset the ignition sequence. : Powers the heater on or off
: Often related to air in the pipes or water supply issues. Repeat the pre-heating process or flush air from the furthest tap.
: If your unit supports a circulation loop, press the Pre-heat button to warm the pipes before use. The maximum pre-heat temperature is capped at 50∘C50 raised to the composed with power cap C for safety. Troubleshooting & Error Codes If the unit malfunctions, the will flash a specific number on the digital display. Contact Towngas Customer Service at 2232 1111
: Used to transfer control between multiple remotes (e.g., bathroom and kitchen). A lit indicator means that specific remote has control over temperature settings. Operation Indicator : Green : The unit is in standby mode. Yellow : The unit is currently operating and heating water.
: Shows the current hot water setting and displays fault signals (error codes) if an abnormality occurs. Operating Instructions
The is a wired remote controller specifically designed for Towngas instantaneous gas water heaters. It allows users to manage hot water settings directly from the bathroom or kitchen with precision and safety. Core Functions & Indicators