Some firmware versions use an "Exclusive" or "Login Restriction" toggle. When enabled, this can limit access to a single administrator session to prevent conflicting configuration changes.
To allow multiple users or full control, navigate to Admin Functions > Changing ID/Password and set Login Restriction to OFF . Step-by-Step Login and Setup toshiba network camera user login ro exclusive
For reliable long-term access, go to Network Settings > IPv4 and change the mode from DHCP to Static . This prevents the IP from changing after a power cycle. Some firmware versions use an "Exclusive" or "Login
Connect the camera to your LAN. Use the Toshiba Camera Finder Tool to locate the camera's current IP address if it has been assigned one via DHCP. Step-by-Step Login and Setup For reliable long-term access,
Enter the camera's IP address into a web browser (e.g., http://192.168.0.100 ). Authentication: Enter the default root / ikwd credentials.